• Sumicrystal UP cutting tool blanks are cut from large high quality single crystal diamonds which were synthesized under ultra-high pressure and temperature
• Sumicrystal blanks are classified as type 1B and all sides of the UP blank are 100 face orientation
• Sumicrystal diamond contains controlled amounts of dispersed nitrogen (10-100 ppm) which allows for very uniform blank to blank properties, superior fracture strength, high hardness and high thermal conductivity
• Special shapes and sizes (up to 7.0 mm) are available in addition to the standard blanks shown below:

Standard Items

Units (mm)

Standard Type
Shape	Product Number	L	W	C1,C2		L
	UP282512	2.8~3.5	2.5~3.5	~0.8		1.2+/-0.1
	UP282515					1.5+/-0.1
	UP303015	3.0~3.5	3.0~3.5	~0.3
	UP301415		1.4~1.7
	UP333014	3.3~4.0	3.0~4.0	~0.9		1.4+/-0.1 1.7+/-0.1
	UP333017
	UP353514	3.5~4.0	3.5~4.0	~0.4		1.4+/-0.1
	UP353517					1.7+/-0.1
	UP351717		1.7~2.0

• Arrows indicate direction for easy polishing.
• 6 main planes have (100) orientation and ground surfaces
• Blanks have habit faces at corners

Economy Type
Shape	Product Number	D	T
	UP1510	1.5	1.0
	UP1512	1.5	1.2
	UP2010	2.0	1.0
	UP2012	2.0	1.2
	UP2510	2.5	1.0
	UP2512	2.5	1.2
	UP2515	2.5	1.5
	UP3012	3.0	1.2
	UP3015	3.0	1.5
	UP3512	3.5	1.2
	UP3515	3.5	1.5
	UP4015	4.0	1.5
	UP4020	4.0	2.0
	UP4515	4.5	1.5
	UP4520	4.5	2.0
	UP5015	5.0	1.5
	UP5020	5.0	2.0
	UP6010	6.0	1.0
	UP6515	6.5	1.5

• Diamond within cylindrical ØD is inclusion free.
• Top face is as grown, bottom face is ground.
• Top and bottom faces are (100).
• Special sizes available upon request.