TURNING/BORING SYSTEMS > Inserts
| Photo/Downloads | Grade | Hardness (Hv) | T.R.S. (kg/mm2) | Applications | |||
|---|---|---|---|---|---|---|---|
|
T110A | 1,680 | 165 | Finish turning of steels and stainless steels | |||
| T1200A | 1,680 | 165 | General purpose to finish turning of steel and stainless steels | ||||
| T2000Z | 1,680 | 165 | General purpose to finishing of steels and stainless steels with ZX Coating | ||||
| T3000Z | 1,680 | 165 | Medium to finish interrupted machining of steel with ZX coating | ||||
| T130Z | 1,550 | 200 | Turning of steels and stainless steels with PVD coating | ||||
| T130A | 1,550 | 200 | Steel and stainless steel threading and cut-off applications |
ceramic Inserts
| Photo/Downloads | Grade | Composition | Hardness (Hv) | Applications | |||
|---|---|---|---|---|---|---|---|
|
NB90S | Al2O3 + TiC | 2,000 | Finish turning of steels hardened up to 60 HRc | |||
| NS30 | Si3N4 | 1,650 | Turning and milling of cast iron | ||||
| NS260 | Si3N4 | 1,750 | Turning and millling of cast iron | ||||
| NS260C | Si3N4 | 1,750 | High speed continuous turning of cast iron |
PCD
| Photos/Downloads | Grade | Hardness (Hv) | Applications | |||
|---|---|---|---|---|---|---|
|
DA1000 | 11,000-12,000 | 1.5x tougher than conventional PCD grades. Milling and heavy interrupted turning of non-ferrous metals, including aluminum alloy DA1000 Brochure (PDF) |
|||
| DA2200 | 9,000-10,000 | Finishing, roughing and interrupted machining of aluminum and non-ferrous materials | ||||
| DA10 | 10,000-12,000 | Machining of aluminum, copper, wood, rubber, graphite and carbide | ||||
| DA200 | 8,000-10,000 | Interrupted cutting of non-ferrous alloys and plastics | ||||
| DA90 | 10,000-12,000 | High-silicon aluminum alloys, ceramics and carbide cutting |
CBN
| Photo/Downloads | Grade | Hardness (Hv) | T.R.S. (kg/mm2) | Applications | |||
|---|---|---|---|---|---|---|---|
|
BN100 | 400-4500 | 80 | Turning of gray cast iron and exotic materials | |||
| BNX10 | 2800-3200 | 80-90 | High speed continuous cutting of hardened steels | ||||
| BN250 | 3200-3500 | 100-110 | Continuous to moderately interrupted cutting of hardened steels and cast irons | ||||
| BNX20 | 3200-3400 | 95-110 | High speed continuous cutting of hardened steels (HrC 45-68) |
||||
| BNX25 | 3000-3200 | 100-110 | High speed continuous cutting of hardened steels (HrC 45-68) |
||||
| BNX300 | 3300-3500 | 110-120 | Heavy interrupted cutting of hardened steels | ||||
| BN500 | 3300-3500 | 100-110 | Continuous and interrupted turning of nodular and gray cast iron | ||||
| BN600 | 3900-4200 | 95-110 | Turning of cast iron, powdered metals, exotic materials and heat resistant alloys High speed milling of gray cast iron | ||||
| BN700 | 4100-4400 | 120-130 | High speed machining of cast irons and powdered metals | ||||
| BNC80 | 3200-3400 | 100-110 | High speed continuous cutting with the ability to achieve superior surface finishes | ||||
| BNC150 | 3000-3300 | 110-120 | TiCN base coated for high speed machining of hardened steels | ||||
| BNC200 | 3400-3600 | 110-120 | High speed turning of continuous and mild interrupted hardened steels (HrC 45-68) | ||||
| BNC300 | 3300-3500 | 120-130 | Excellent performance in a wide range of interrupted hard turning | ||||
| BNS800 | 4000-4300 | 100-12- | High speed turning and milling of gray cast iron Turning of chilled iron, nickel-based iron, and ductile iron |
Technical Information
| Nomenclature | Download PDF | |
| Chipbreakers |
| Threading Inserts and Tools | Download PDF | |
| Grooving Inserts and Tools | Download PDF | |
| Cut-off Inserts and Tools | Download PDF |
